NEC Xen IPK Features & Specifications Manual page 120

July 2003
110 – A27
To set the Automatic Trunk-to-Trunk Transfer Mode from the
Attendant Position:
T
1. Press .
2. Dial .
FA
3. Dial the incoming trunk number (
T
4. Press .
Note: Dialling 00 sets or cancels the Automated Attendant mode for all
trunks when the trunks are idle. If a trunk is busy when 00 is dialled, it
is not set. To set the Automated Attendant to a busy trunk, dial the
individual trunk number.
To cancel the Automatic Trunk-to-Trunk Transfer Mode from the
Attendant Position:
T
1. Press .
2. Dial .
FB
3. Dial the incoming trunk number (
T
4. Press .
Note: Dialling 00 sets or cancels the Automatic Trunk-to-Trunk Mode for all
trunks when the trunks are idle. If a trunk is busy when 00 is dialled, it
is not set. To set Automated Trunk-to-Trunk mode to a busy trunk,
dial the individual trunk number.
To confirm the Trunk Forward Assignment from the Multiline
Terminals with a LCD:
T
1. Press .
2. Dial .
FD
3. Dial the incoming trunk number (
T
4. Press (outgoing telephone number is displayed in the LCD). If
the outgoing telephone number is longer than nine digits, continue to
T
press to display the remaining digits.
NEC Business Solutions Ltd
0A ~ FD,00
0A~FD,00
~ ).
0A FD
Automatic Trunk-to-Trunk Transfer
)
)