Dp To Dtmf Switching - NEC Xen IPK Features & Specifications Manual

Phone system

Hide thumbs Also See for Xen IPK:

Table of Contents

DP to DTMF Switching

AVAILABILITY

Features and Specifications Manual

This feature is used for systems connected to Dial Pulse (DP) trunks that

require communication with computers that demand DTMF signalling.

Terminal Type

All Multiline Terminals.

Required Components

TLI(2)-U( ) ETU, COI( )-U( ) ETU, COID( )-U( ) ETU

To switch an outside call in progress on the Dial Pulse line:

Dial desired number.

Restrictions

Dial Pulse Single Line Telephones cannot send DTMF signals and

cannot use this feature.

After a DP line is switched to DTMF (by using an Access Code), the

connection can only be switched back to DP by going on-hook.

DP/DTMF switching operations can be programmed as part of the

Speed Dial program.

This feature is not required for DTMF Single Line Telephones. These

telephones send their own DTMF signals over the voice path to the

outside equipment.

Code Restriction, Outgoing Restriction, and LCR are not bypassed

when this feature is used.