NEC Xen IPK Features & Specifications Manual page 238

July 2003
SERVICE
CONDITIONS
228 – C25
To cancel a message from a Multiline Terminal:
T
1. Press .
2. Dial .
GI
T
3. Press .
Data Assignment
A maximum of 10 messages can be programmed in System
Programming.
General
Six messages are provided in default, however, all 10 can be
programmed.
Default messages are as follows:
Don't Disturb
Meeting
Business Trip
Not In
With Guest
Out of Office
The message remains displayed on the LCD of the Multiline Terminal
where the message was set.
This feature is programmable for Multiline Terminals in Class of
Service assignments.
When this feature is set, the Feature LED flashes.
A maximum of 13 characters and the return time can be set for
each message.
Don't Disturb must be set to display the message.
When calling a station in Do Not Disturb mode, a message displays on
the caller terminal. Three seconds later, the return date and time
are displayed.
NEC Business Solutions Ltd
Customised Message