Assigned Night Answer (Ana - NEC Xen IPK Features & Specifications Manual

Assigned Night Answer
(ANA)
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
The Assigned Night Answer (ANA) feature is a Direct Inward Termination
programmed to ring directly at a selected station when the system or tenant
is in the Night Mode. This assignment operates independently from the DIT
(Day Mode) ringing assignment.
Terminal Type
All terminals.
Required Components
None.
Normal incoming call handling procedures apply.
Data Assignment
CO/PBX lines can be assigned to ring a station number, a hunt group
master number, or an ACD/UCD Pilot number.
Multiple CO/PBX lines can be assigned to ring at the same station,
hunt group master number, or ACD/UCD Pilot number.
Incoming ANA calls follow the station Call Forward setting.
Restrictions
When a CO/PBX line is assigned for ANA, the Night Mode CO/PBX
ring assignment is disabled.
General
ANA incoming ringing is assigned for Distinctive Ring or Synchronous
Ring system-wide.
When a busy station, programmed for ANA, receives an incoming
ANA call, the system provides Camp-On tone for the busy station. The
calling party receives ringback tone until the call is answered.
A Call Pickup for the same tenant, Access Code 68 (set at default),
can be used to answer ANA calls.
ANA calls do not activate External Tone Ringer or Night Chime.
A-10
A10 – 39