NEC Xen IPK Features & Specifications Manual page 76

July 2003
66 – A17
To set the Automated Attendant/Delay Message Mode from the
Attendant Position:
T
1. Press .
2. Dial .
HA
3. Dial the incoming trunk number (
PBX lines].
Note: Dialling 00 sets or cancels the Automated Attendant mode for all
trunks when the trunks are idle. If a trunk is busy when 00 is dialled, it
is not set. To set the Automated Attendant to a busy trunk, dial the
individual trunk number.
T
4. Press .
To cancel the Automated Attendant/Delay Message Mode from the
Attendant Position:
T
1. Press .
2. Dial .
HB
3. Dial the incoming trunk number (
PBX lines].
Note: Dialling 00 sets or cancels the Automated Attendant mode for all
trunks when the trunks are idle. If a trunk is busy when 00 is dialled, it
is not set. To set the Automated Attendant to a busy trunk, dial the
individual trunk number.
T
4. Press .
To answer by One Level:
1. Receive an incoming CO/PBX call.
2. The Automatic Answer with Delay Message answers the call and
sends a greeting.
3. The outside
Programmable).
00
00
party hears ringback
Automatic Answer with Delay Message
NEC Business Solutions Ltd
~ FD ). [ 00 = All CO/
~ ). [ = All CO/
FD 00
tone or MOH (System