NEC Xen IPK Features & Specifications Manual page 430

July 2003
420 – M6
CALL FORWARDING
term
When a D Drover is powered off or Out of Zone, a call directed to it is
forwarded to a VMS, and a message can be recorded to the VMS and
checked from the D
automatically after the Voice Mail message is recorded.
CALLING NAME DISPLAY - D
When an incoming call is ringing, or a hold call terminates on the D
Drover, the calling party name is displayed on the LCD.
CALLING NUMBER DISPLAY - D
This feature allows the Station Number of an incoming call to be displayed
term
on the LCD of the D
DTMF SIGNAL SENDER
This feature allows a D
party terminal or Voicemail.
HAND OVER
When signal transmission quality becomes a problem, the D
originates another call automatically to seize another radio channel and
force the system to handover the call to another base station to maintain
quality.
term
INDIVIDUAL D DROVER CALLING
The calling party can page the individual D
is available, the lower number digits are displayed on the LCD of the called
term
D Drover. The called D
LAST NUMBER REDIAL
term
The D Drover user can store the number for the previous five calls. The
stacked numbers are sequentially displayed on the LCD to allow the user to
make an outgoing call by selecting the desired number from the display.
OUT OF ZONE INDICATION
A warning tone and LCD display indicate when the D
out of the service area.
OVERLAP DIALLING
term
The D Drover user accesses dial tone and then dials the indicated
number to originate a call.
PRESET DIALLING
term
The D Drover user can confirm the number to be dialled before
originating a call.
term
Drover. The VMS can page the D
term
Drover
term
Drover
Drover receiving the call.
term
Drover user to send a DTMF tone to the called
term
term
Drover user can then press LK1 to answer.
NEC Business Solutions Ltd
term
term
Drover. If the calling number
term
Drover user moves
Multi-Zone Digital Cordless
Drover
term
Drover