NEC Xen IPK Features & Specifications Manual page 300

July 2003
SERVICE
CONDITIONS
RELATED
FEATURES LIST
GUIDE TO
FEATURE
PROGRAMMING
Order
and
Shortcut
¶
Line Key Selection
+BN
¶
Line Key Selection for Tenant Mode
+BN
¶
Line Key Selection for Telephone Mode
+BTM
290 – D18
To use the Drop key from a Multiline Terminal with a CO/PBX call in
progress:
1. Press the Feature Access or One-Touch key programmed as a
Drop key.
2. Receive new CO/PBX dial tone.
3. Dial the desired number.
Restrictions
The Drop key provides a timed disconnect signal on CO/PBX lines.
The time of a disconnect signal is fixed at 1.5 seconds, and cannot be
changed by System Programming.
The Drop key cannot be used for internal, DID, or Tie line calls.
General
When on a CO/PBX call, you can press the Feature key and dial 5 to
use the Drop key function.
Feature
Number
R-1 Recall Key
System Data Name
NEC Business Solutions Ltd
Feature Name
Memory
Function
Block
2-05
2-06
4-12
1-8-07 1-8-08
Attendant Station
Page-Line Page-Line
Key Key
Drop Key