NEC Xen IPK Features & Specifications Manual page 158

July 2003 NEC Business Solutions Ltd
General:
A caller using a telephone without Softkeys, calling from outside the
system, or from a remote system is prompted to hear Caller ID
information and return a call.
Return Call is available for subscriber messages and public messages.
Return Call is accessible to a subscriber during and after message
playback.
Return Call is available for new and old messages.
Return Call is accessible to a subscriber using Softkeys in Softkey
mode or using DTMF in voice conversation Mode.
One minute before disconnecting the original caller, voice mail plays a
warning prompt and immediately before disconnecting plays a prompt
to indicate that it is returning to the subscriber mailbox.
When a subscriber listens to a message from a Softkey equipped
telephone, and Caller ID information is unavailable, the voice mail
system leaves the second line of the LCD blank. When Caller ID is
disabled on the system, voice mail displays the message count.
From the subscriber options Softkey menu, a subscriber can access a
Softkey menu that allows selection of name or number to be displayed
on the LCD during message playback. The default is number. Voice
mail uses this setting to determine the initial display on the LCD
during playback.
Voice mail continues to display Caller ID on the LCD while the post-
message playback menu is still displayed on a telephone equipped
with Softkeys.
During Return Call, the voice mail port is in conference with the box
owner and messages.
Internal station terminals using Call Return have the Conf key LED On.
148 – C5 Caller ID Call Return