NEC Xen IPK Features & Specifications Manual page 372

July 2003
SERVICE
CONDITIONS
GUIDE TO
FEATURE
PROGRAMMING
Order
and
Shortcut
¶
Intercom Call Voice/Tone Signal Selection
+BI
¶
DSS Call Voice/Tone Signal Selection
+BTD
¶
Intercom Feature Access Code Assignment
+BA
362 – I4
Data Assignment
Voice/Tone or Tone/Voice is assigned in System Programming system-
wide (default: voice/tone call).
Restrictions
Single Line Telephone users can voice announce to Multiline Terminal
users but cannot receive voice announcements.
General
The Access Code used to change from a voice call to a tone call, or
from a tone call to a voice call, can be changed in System
Programming.
Voice or Tone can be selected as often as needed by dialling 1 (set as
default) during a call.
If the station is receiving a handsfree call, the MIC must be activated
for reply.
Single Line Telephone users can switch from voice to tone or from tone
to voice by dialling 1 (set at default) during an internal call to a Multiline
Terminal.
When a voice announcement is received at a Multiline Terminal, other
audible signals cannot be received.
This feature allows Voice/Tone switching only from the calling side.
System Data Name
NEC Business Solutions Ltd
Memory
Function
Block
1-2-01
1-6-03
1-2-24 001
Internal Voice/Tone Signalling
1-8-07 1-8-08
Attendant Station
Page-Line Page-Line
Key Key