Unsupervised Conference - NEC Xen IPK Features & Specifications Manual

Unsupervised Conference

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
The Unsupervised Conference feature allows a Multiline Terminal user to
exit an established conference call and leave the remaining parties to
continue talking. This same user can then reenter the conference anytime.
Terminal Type
All multiline terminals.
Required Components
None.
To exit a conference:
1. Establish a conference call from a Multiline Terminal.
R
2. Press (conferenced CO line keys turn red).
3. Multiline Terminal user now hears dial tone.
To reenter a conference:
1. Lift the handset or press
R
2. Press .
Data Assignment
When establishing an Unsupervised Conference call, a warning signal
sounds every three minutes for the duration of the call. A telephone
put in the DND Mode can still hear the warning sounds. This feature
must be allowed in System Programming Memory Block 4-94 (3-
Minute Alarm Selection).
Restrictions
Users can join only one Unsupervised Conference at a time.
The Unsupervised Conference feature is available only on Multiline
Terminals.
P
.
U-4
U4 – 603