Off-Hook Ringing - NEC Xen IPK Features & Specifications Manual

Off-Hook Ringing

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
The Off-Hook Ringing feature alerts a Multiline Terminal user that an
incoming outside call is ringing to that station while the user is engaged on
another call. Off-Hook Ringing is provided through the built-in speaker of
the Multiline Terminal and at a lower volume than On-Hook Ringing.
Terminal Type
All Multiline Terminals.
Required Components
None.
To set off-hook ringing volume:
1. Go off-hook with the handset.
2. Dial the Access Code (default
3. Dial from the dial pad.
A
M
4. Press press (
^
off-hook ringing volume.
5. Go on-hook.
Data Assignment
Off-Hook Ringing is assigned per station (default All stations have Off-
Hook Ringing).
Restrictions
Off-Hook Ringing is not provided when the Multiline Terminal speaker
is activated or when the terminal is in Do Not Disturb (DND) mode.
General
Off-Hook Ringing applies only to lines assigned to ring.
At system default, Off-Hook Ringing tone volume is approximately 10
dB lower than On-Hook Ringing tone volume.
The Off-Hook Ringing feature is effective when a headset is used.
Off-Hook Ringing follows the Distinctive Ringing Pattern selection and
not Synchronous Ringing.
Off-Hook Ringing is provided for calls to a Secondary Incoming
Extension when the station user is busy on an internal or outside call.
).
F0
= increase) or ( = decrease) to increase/decrease
v
O-1
O1 – 443