Call Forward - Display - NEC Xen IPK Features & Specifications Manual

Call Forward - Display

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
When a call is forwarded from one Multiline Terminal to another, the
forwarding indication and forward station number are shown on the Multiline
Terminal display.
Terminal Type
All Display Multiline Terminals.
Required Components
Multiline Terminals with display. Refer to C-7 Call Forward – All Call and C-
8 Call Forward – Busy/No Answer features.
Not applicable.
General
DIT, ANA, DID, Tie, Automated Attendant transfer, and SCD calls can
support Call Forward - Display.
This feature only supports forwarded calls to a primary station number.
When the destination is a CAR key, the forwarding display information
is not shown.
Internal calls do not show forwarding display.
C-10
C10 – 171