NEC Xen IPK Features & Specifications Manual page 530

July 2003
522 – S10
To program a Feature Access key for Station Speed Dial from a
Multiline Terminal:
T
1. Press .
Q
2. Press .
3. Press the Feature Access key.
4. Dial .
0
5. Dial the Trunk or Trunk Group Access Code (maximum four digits).
6. Dial the desired telephone number.
T
7. Press .
To program a One-Touch key for Station Speed Dial from a Multiline
Terminal:
T
1. Press .
Q
2. Press .
3. Press the One-Touch key.
4. Dial .
0
5. Dial the Trunk or Trunk Group Access Code (maximum four digits).
6. Dial the desired telephone number.
T
7. Press .
To program a Station Speed Dial buffer from a Single Line
Telephone:
1. Lift the handset, and receive internal dial tone.
2. Dial the Station Speed Dial Program Access Code (default:
3. Dial the Station Speed Dial buffer number to be programmed
(
H0 II
~
4. Dial the Trunk or Trunk Group Access Code (maximum four digits).
5. Dial the telephone number to be stored.
6. Restore the handset.
To use a Station Speed Dial buffer from a Multiline Terminal:
Q
1. Press .
2. Dial the Station Speed Dial buffer number (
).
NEC Business Solutions Ltd
GF
).
H0 II
~
Speed Dial – Station
).