NEC Xen IPK Features & Specifications Manual page 416

July 2003
SERVICE
CONDITIONS
GUIDE TO
FEATURE
PROGRAMMING
Order
and
Shortcut
¶ Attendant Add-On Console to Telephone Port
+BTD
Assignment
¶
Attendant Add-On Console Key Selection
+BTD
406 – M1
General
A Message Waiting indication can be identified on the large LED on
the recipient Multiline Terminal. Message Waiting indications from the
Attendant Add-On Console flash green; indications from a Voice Mail
Unit flash red.
To confirm a Message Waiting indication at an Attendant Add-On
Console, ensure that the green LED associated with the station is lit. A
Message Waiting indication remains on until the message is cancelled
at the Attendant Add-On Console where it was set.
When two or more (system maximum of four) Attendant Add-On
Consoles are installed, the message is displayed only on the Attendant
Add-On Console where the setting was made.
All Attendant Add-On Consoles can be used to set a Message Waiting
to the same station.
Single Line Telephones supported by an SLI(8)-U(
Message Waiting LED receive a flashing Message Waiting indication
when set.
Message Waiting from an Attendant Add-On Console has higher
priority than Message Waiting from a Voice Mail Unit.
An Attendant Add-On Console with a Message Waiting key
assigned on it cannot be used to set the Attendant Station Outgoing
Lockout feature.
Message Waiting status is retained in memory by the memory
backup battery.
System Data Name
NEC Business Solutions Ltd
Memory
Function
Block
1-6-01
1-6-05
) ETU with a
1-8-07 1-8-08
Attendant Station
Page-Line Page-Line
Key Key
Message Waiting