NEC Xen IPK Features & Specifications Manual page 560

Phone system
Hide thumbs Also See for Xen IPK:
Table of Contents

Advertisement

July 2003
552 – S18
Restrictions
This feature can be used to relocate terminals among the following
combinations:
Multiline .............................................Multiline
Single Line Telephone ......................Single Line Telephone
Single Line Telephone Adapter .......Single Line Telephone Adapter
This feature cannot be used with the following combinations:
Multiline .............................................Single Line Telephone
Multiline .............................................Single Line Telephone Adapter
Single Line Telephone ......................Single Line Telephone Adapter
An error tone is received and Error is displayed in the LCD under the
following conditions:
Entering a station number that causes a prohibited combination
(refer to the previous bullet for combinations).
Entering a station number that does not exist.
Entering the station number of the terminal being used to perform
Station Relocation.
Entering a Pilot Number or CAR number.
Entering the wrong password.
Entering a station number of the terminal to be exchanged and that
station is not idle.
Station Relocation Mode is not set.
General
The station password must be set from an individual station.
The station password is the same as the password set for Station
Lockout.
If Feature + 84 is programmed on a One-Touch key or Feature Access
key, the LED lights when this feature is turned ON and remains lit until
the feature is turned OFF. Feature + 84 is used to toggle this feature
ON and OFF.
When this feature is set/reset using Feature + 84, the setting is
retained even if a second power on is performed. The BLF indication
on the One-Touch or Feature Access keys returns when the system
becomes operable.
If multiple Attendants have Feature + 84 stored on a One-Touch or
Feature Access key, they have the same BLF indications on the key
where Feature + 84 is stored.
When this feature is set/reset using Feature + 84, RELO Mode ON or
RELO Mode OFF is displayed for five seconds.
NEC Business Solutions Ltd
Station Relocation

Advertisement

Table of Contents
loading

Table of Contents