NEC Xen IPK Features & Specifications Manual page 374

July 2003
SERVICE
CONDITION
364 – I5
On MLT with Prime Line or Hot Line Set and ICM key programmed:
1. Lift the handset or press
2. Press the pre-programmed ICM key.
3. Receive intercom dial tone.
4. Dial extension number
.
On MLT with Prime Line or Hot Line Set:
1. Lift the handset or press
P
2. Press .
3. Receive intercom dial tone, an intercom extension call or directed
trunk call (DIT termination, AA termination or DID).
4. Dial extension number.
On SLT with Prime Line or Hot Line Set:
1. Lift the handset or press
S
2. Press the
3. Receive intercom dial tone.
4. Dial extension number.
Data Assignment
The ICM (Intercom) key is assigned by system programming.
Restrictions
There are no restrictions on intercom call provided the extension exists in
the system.
General
The following applies only to Multiline Terminals.
With a call in progress (internal or trunk call) the user can answer an
intercom call or directed trunk call (DIT termination, AA termination, or
DID), by pressing
However, this will terminate the existing call.
P
.
T
.
P
.
key.
T P
, or the pre-programmed Intercom key.
NEC Business Solutions Ltd
Intercom Function