Recall Key - NEC Xen IPK Features & Specifications Manual

Recall Key

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
The Recall key feature either generates a hookflash to access features
provided by the outside exchange or abandons a call while retaining the
CO/PBX line for another call. Each Multiline Terminal is equipped with a
Recall key. The function of this key is set in System Programming.
Terminal Type
All Multiline Terminals.
Required Components
None.
To use this feature with an outside CO call in progress:
S
1. Press .
2. Receive new CO dial tone; line is not released.
To use this feature with a PBX/Centrex call in progress:
S
1. Press .
2. Receive PBX/Centrex second dial tone.
Data Assignment
The default duration of the timed disconnect signal or hookflash is 100
milliseconds and is programmable system-wide.
A hookflash can be programmed as any digit in a Speed Dial buffer.
Single Line Telephones can generate a hookflash on a CO/PBX line
if allowed in System Programming (system-wide) or by an
Access Code.
General
The Recall key functions only on Loop Start Trunks.
A Drop key can be programmed on a Flexible Line key or One-Touch
key to be used for abandoning a call and retaining the same PBX/
Centrex line.
While receiving busy, error tone, or an internal call, press the Recall
key to provide a new internal dial tone.
R-1
R1 – 479