NEC Xen IPK Features & Specifications Manual page 31

Xen IPK
Features and Specifications Manual
Speaker or Off Hook
Correct F/V
NO
Account Code Access
NO Correct F/V
Account Code
Error Displace
and Tone
Enter trunk Access Code
(Second DT)
Dial Digits
Check against 4-07, 4-08
Figure A3-1: Account Code Forced/Verified
Restrictions
Existing restrictions and Least Cost Routing (LCR) assignments are
applied after Forced Account Codes are entered.
Emergency 000 (111 NZ) calls cannot be made unless a valid Forced
Account Code is entered. In such cases, provide access to emergency
numbers by programming them into One-Touch or Feature Access
keys.
Verified and Unverified Forced Account Codes cannot be used in the
same class of service.
General
Only outgoing calls from an intercom require a Forced Account Access
Code. Direct access to trunks bypasses this feature.
Reorder tone is provided if an outgoing call is Dialled without entering
the Forced Account Access Code and a valid Forced Account Code.
Call Alert Notification is not provided during Account Code Entry
verification and programming.
PBR Timer values apply when using a Single Line Telephone to enter
a Forced/Verified Account Code.
Forced Account Codes can be uploaded, downloaded, or modified
using PC based System Programming.
Forced Account Code and Account Code entries print on the SMDR
report if both are used.
Features and Specifications Manual
(ICM DT)
YES
MB 1-1-46/47/48
YES
YES
ICM (DT)
MB 1-1-46/47/48
Check against 4-07, 4-08
Dial destination if number allowed.
Trunk Access Code
Press Off Line Key
(Trunk Group
(Network DT)
Route Advance)
or CO/PBX
Dial Digits Dial Digits
Check Agent
4-64, 4-65
A3 – 21