NEC Xen IPK Features & Specifications Manual page 114

Phone system
Hide thumbs Also See for Xen IPK:
Table of Contents

Advertisement

July 2003
SERVICE
CONDITIONS
104 – A25
Data Assignment
Automatic Redial timeout options are programmable as follows:
Programming Range
Callback Time
Wait Time
Redial Times
Restrictions
The station retains sole use of the outside line during Automatic
Redial.
If an internal call is received during Automatic Redial, it cannot be
answered unless Automatic Redial is released. The calling station
receives a call waiting tone.
This feature is not available for Single Line Telephones.
This feature is not available for Tie/DID lines.
General
This feature remains in effect until the party initiating the call lifts the
handset during a redial attempt. An incoming call is received on that
line, or two (depending on System Programming) redial attempts
are made.
The system does not detect an answer, no answer, or busy condition
from the outside network.
If Automatic Redial is in progress (a call is actually being initiated by
the system), an LCD appearance (
Automatic Redial is activated. For stations with or without an LCD, a
flashing Feature LED indication is provided, and the Redial key is
steadily lit.
The outside line LED on the Multiline Terminal, where Automatic
Redial is initiated, is green but lights red on other Multiline Terminals in
the system.
If the feature times out, access a CO/PBX line, press the Feature key
and then the Redial key, or a Feature Access or One-Touch key
programmed for this feature, to reactivate it.
If an incoming CO/PBX call is received from the CO during the waiting
period of the Automatic Redial feature, Automatic Redial is released
and a busy tone is sent to the station.
A station user cannot set a Tone Override to a station with an
Automatic Redial set. However, a Callback Request or an Automatic
Callback can be set.
The handset must be lifted off-hook to disable Automatic Redial after
an outside call is answered.
NEC Business Solutions Ltd
1~100 seconds
1~100 seconds
1~ 15 times
Q
: Number Dialled) confirms
Default
30 seconds
60 seconds
2 times
Automatic Redial

Advertisement

Table of Contents
loading

Table of Contents