NEC Xen IPK Features & Specifications Manual page 418

July 2003
SERVICE
CONDITIONS
RELATED
FEATURES LIST
408 – M2
When the MIC ON/OFF feature is not assigned on a Feature Access
key or a One-Touch key:
When the MIC LED is off
T
1. Press .
2. Dial Access Code
3. The MIC LED goes on.
When the MIC LED is on
T
1. Press .
2. Dial Access Code
3. The MIC LED goes off.
General
term
D Series i Multiline Terminals have a built-in MIC key.
The MIC key controls the built-in microphone during handsfree
mode and controls the handset mute feature during handset/headset
operation.
The microphone is activated when the MIC LED is lit, and an internal
voice signal call is made to a Multiline Terminal.
If full handsfree is denied in System Programming, Handsfree Dialling/
Monitoring does not activate the microphone.
The microphone status is indicated by the LED labelled MIC (not the
Flexible Line key, if assigned). When the MIC LED is on, the
microphone is on.
Feature
Number
F-7 Full Handsfree Operation
H-1 Handset Mute
H-2 Handsfree Answerback
.
A
A .
Feature Name
NEC Business Solutions Ltd
Microphone Control