NEC Xen IPK Features & Specifications Manual page 324

July 2003
SERVICE
CONDITIONS
314 - E6
To answer on a Single Line Telephones:
1. Lift the handset.
2. Dial the Meet-Me Access Code (
External Page, or
in default).
Data Assignment
After five minutes (default value for External Page timeout) a page
automatically disconnects.
An alert tone to external speakers can be specified in System
Programming. The alert tone can be provided at the beginning and
end of the external page.
Internal and External Zone Paging time outs can be assigned
individually. During an All Internal/External Zone Page, the external
timeout timer is used.
General
Up to three zones of paging and All Zone Paging are possible.
When an External Zone Page is in progress (either Zone A, B, C, or All
Zone), no other station can activate External Zone Paging until all
zones become idle again.
Default Access Codes are:
All External Zones
External Zone A
External Zone B
External Zone C
All Internal/External Zones
External Meet-Me
Internal Meet-Me
After a page is established and the Meet-Me code is dialled, the paging
circuit is released and another party may page.
If external speakers are used, they must be specified (YES/NO) in
System Programming as being connected to the system. Up to three
external zones can be connected.
A Multiline Terminal user can conference an outside line with an
External Zone Page; this allows a conversation to be monitored by
people within speaker range.
Talk Back Paging is supported on Xen IPK.
A single external paging zone is built into the Xen IPK KSU.
EJ
, if the page is only an External Page, as set
EL
55
56
57
58
59
5#
Default Access Codes can be changed
5
NEC Business Solutions Ltd
, if the page is an Internal/
at the time of installation
External Zone Paging (Meet-Me)
.