Caller Id - Incoming - NEC Xen IPK Features & Specifications Manual

Caller ID - Incoming

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
Caller ID displays the calling party telephone number and/or name on the
LCD of the Multiline Terminal for CO incoming calls. Up to 16 Multiline
Terminals that have CO ringing and/or CAR appearance assigned can
automatically display Caller ID information during an incoming call. Multiline
Terminals that are not part of these 16 terminals can display Caller ID if they
have the appropriate class of service by manual operation. After the CO call
has been answered the Caller ID information will follow the call wherever it
is transferred to.
Terminal Type
All Multiline Terminals with an LCD.
Required Components
COID(4)-U( ) ETU, COID(8)-U( ) ETU, BRT(4)-U( ) ETU, or PRT(1)-U( )
ETU to receive Caller ID indication from a central office.
MIFM-U( ) ETU with KMM( )UA installed when Caller ID Scrolling or Call
Return are desired.
To display a stored Caller ID:
Press the Scroll/Directory to display the last incoming Caller ID. Repeatedly
press the Scroll/Directory to display additional Caller ID names/numbers. (A
maximum of 50 Caller ID names/numbers are displayed.)
The Scroll key is programmed in System Programming using the Line Key
Selection for the Telephone Mode Memory Block. Refer to the IPK System
Programming Manual for instructions.
To return a call to the name/number displayed on the LCD:
Go off-hook. The system automatically accesses an outside line and dials
the ID number displayed on the LCD.
C-6
C6 – 151