NEC Xen IPK Features & Specifications Manual page 404

July 2003
SERVICE
CONDITIONS
GUIDE TO
FEATURE
PROGRAMMING
Order
and
Shortcut
¶
Access Code (1-, 2-, 3-Digit) Assignment
+BA
394 – L2
Data Assignment
The Last Number Redial Access Code (default #) can be changed in
System Programming.
Restrictions
Internal calls do not apply to this feature.
General
Last Number Redial memory is protected by battery backup.
Last Number Redial stores up to 24 digits (plus the Trunk
Access Code).
The Access Code # is fixed in system software for use with the
Redial key.
This feature can be assigned to a Feature Access or One-Touch key.
The Last Number Redial memory buffer can be displayed by pressing
the Conf key, Redial key, and then #.
A Private Line must be accessed by Direct CO access for Redial
to operate.
Manually dialled numbers, Speed Dial numbers, Save/Store and
Repeat numbers, One-Touch dial numbers, or their combinations can
be redialled via the Last Number Redial feature if the last number
dialled was less than 24 digits.
A Trunk Access Code is automatically inserted if the last call was
made by manually selecting an outside line.
System Data Name
NEC Business Solutions Ltd
Memory
Function
Block
1-1-46/47/
096
48
1-8-07 1-8-08
Attendant Station
Page-Line Page-Line
Key Key
Last Number Redial