NEC Xen IPK Features & Specifications Manual page 66

July 2003
SERVICE
CONDITIONS
RELATED
FEATURES LIST
56 – A14
Data Assignment
At default, when a station with Attendant Station Outgoing Lockout is
set, the station is outgoing restricted. This can be changed
(system-wide)
System Programming.
When up to four Attendant Add-On Consoles are installed, the
Attendant Station Outgoing Lockout is displayed only on the Attendant
Add-On Console from where the Lockout was set.
Restrictions
An Attendant Add-On Console, with an Attendant Station Outgoing
Lockout key assigned on it, cannot be used to set the Message
Waiting feature from an Attendant.
General
All Attendant Add-On Consoles can be used to set Attendant Station
Outgoing Lockout.
Attendant Station Outgoing Lockout is retained by the memory
backup battery.
No indication is provided at a terminal when Attendant Station
Outgoing Lockout is set.
To confirm that Attendant Station Outgoing Lockout is set at an
Attendant Add-On Console, ensure that the green LED associated
with the station is lit. Lockout remains set until cancelled at the
Attendant Add-On Console where it was set.
The station with Attendant Station Outgoing Lockout set cannot
manually cancel the lockout.
Feature
Number
M-1 Message Waiting
S-17 Station Outgoing Lockout
to a different Code
Feature Name
Attendant Station Outgoing Lockout
NEC Business Solutions Ltd
Restriction Class in