NEC Xen IPK Features & Specifications Manual page 163

Xen IPK
Features and Specifications Manual
Use Memory Block 3-53 (Caller Name Indication Selection) to allow
the name (NAM) (default: NUM) to be displayed When system speed
dial buffers are assigned number and name and when the Caller ID
number information matches an assigned speed dial number.
When the name is not included in the Caller ID information, Memory
Block 3-53 (Caller Name Indication Selection) compares the Caller ID
information with the dial data in the speed dial area. When the
numbers match, the name in the speed dial area is used as the name.
When a CAR key is assigned on the Multiline Terminal and a DIT/ANA
or VRS/Automated Attendant transferred call is received at the CAR,
the following assignments are required:
Use Memory Block 4-41 (SIE/CAR Ringing Line Preference Selection)
to specify whether to allow (default: YS) or deny (NO) Ringing Line
Preference (go off-hook or press speaker key) on all telephones that
are assigned to CAR keys.
Assign the Multiline Terminal with the CAR key as part of the Caller
ID group.
Scrolling Caller ID with Return Call
Use Memory Block 7-3-04 [MIF (Caller ID) Assignment) to specify
Scrolling and/or Out Dial function to the MIFM-U( ) ETU with
KMM( )UA Unit.
Use Memory Block 4-44 (Caller ID Preset Dial Outgoing CO Selection)
to assign the Trunk Group, Route Advance Group, or Closed
Numbering Group that is seized for Caller ID Outgoing Calls.
Use Memory Block 4-12 (Line Key Selection for Telephone Mode) to
assign the Scroll Key to a line key for each Multiline Terminal using the
Scroll Feature.
Restrictions
To receive Caller ID Indication, the COID(4)/(8)-U( ) ETU, BRT(4)-U( )
ETU or PRT(1)-U( ) ETU must be installed.
SIE incoming calls do not support Caller ID Indication even when the
Multiline Terminal is ringing.
The user can press the Feature key and then the flashing red CO line
key (incoming CO call), CAR key or
A maximum of 16 stations can display Caller ID. - Five users can
access the Scroll function at the same time. IN USE is displayed on
the Multiline terminal of another user that tries to access it.
A maximum of 13 characters can be displayed on the LCD for Caller
ID Name/Number.
Caller ID scrolling and automatic dial out features require installation
of the MIFM-U( ) ETU with attached KMM( )UA Unit.
Features and Specifications Manual
O
key to display Caller ID.
C6 – 153