NEC Xen IPK Features & Specifications Manual page 55

Xen IPK
Features and Specifications Manual
Depending on System Programming (DSS Call Voice/Tone Signal
Selection), the called party rings or receives a voice announcement
when an Attendant makes a call using the Attendant Add-On Console.
When the Attendant transfers a call, the transferred outside line
remains on Non-Exclusive Hold until the call is answered.
Each installed Attendant Add-On Console reduces the maximum
number of stations by one.
The keys are assigned at default as follows:
Keys
ICM Call
01~48
Night Mode
49
Direct Paging Access
50~53
Vacant
54
Message
55
External All Zone Paging
56~59
Transfer
60
Busy Lamp Field indications show if Multiline Terminals, outside lines,
or zone paging is in use.
Busy Lamp Field status indications at the Attendant Add-On
Console are:
LED Indications
Off
Green
Red
Flashing
Winking
LED Indications
Off
Green
Red
Winking
Flashing
Features and Specifications Manual
Stations 100-147 (depending on
system configuration)
Internal Zone and All Zone Page
External Zone and All Zone Page
Busy Lamp Field Status
Station Idle
Not Used
Busy
DND, Call Forward - All Calls, Break Mode (by ACD
Agent)
Function Programming Mode
Outside Line Status
Outside Line Idle
In Use (by Attendant station)
Busy
Call On Hold
Incoming Call
A11 – 45