NEC Xen IPK Features & Specifications Manual page 535

Xen IPK
SERVICE
CONDITIONS
RELATED
FEATURES LIST
Features and Specifications Manual
Data Assignment
The 80 or 1000 Speed Dial Mode is Assigned in System
Programming.
In System Programming, the name can be assigned to be displayed
first, followed by the number dialled, or the number dialled followed by
the name (default: number dialled first, then the name).
Restrictions
One-Touch keys, programmed as Station Speed Dial, cannot have a
name stored with the number to dial.
General
A maximum of 13 characters, using 80 System Speed Dial Mode, or
12 characters, using 1000 System Speed Dial Mode, can be entered
for the name.
When programming Feature Access or One-Touch keys, the
Conference key can be used to backspace and erase an entry.
Stored characters can only be entered for outside line numbers.
Feature
Number
F-2 Feature Access - User Programmable
N-1 Nesting Dial
S-9 Speed Dial - Station
S-10 Speed Dial - System
Features and Specifications Manual
Feature Name
S11 – 527