NEC Xen IPK Features & Specifications Manual page 290

July 2003
SERVICE
CONDITIONS
280 – D14
To cancel Do Not Disturb from any station
1. Lift the handset or press
2. Dial DND cancel;
3. Go on-hook or press
To cancel Call Forward - All Calls and Do No Disturb System-Wide
from Attendant Positions only
T
1. Press .
2. Dial Access Code
T
3. Press .
Data Assignment
At default, the system-wide cancel DND from Attendant Positions is
not allowed.
DND is allowed or denied in Class of Service.
Restrictions
Automatic Callback cannot be set to a station that is in DND mode.
If DND and Call Forward - All Calls are set at the same time at a
station, Call Forward - All Calls takes priority.
General
The Do Not Disturb set and cancel Access Codes can be programmed
on separate Feature Access or One-Touch keys. The DND set key
LED (if equipped) does not light when DND is set.
If a station has a Do Not Disturb single On/Off key assigned, the LED
lights when DND is set.
When a station user sets this feature, the associated red LED winks on
any DSS/BLF key assigned for that station.
Transferred/Hold Recalls, Trunk Queues, Automatic Callback, and
Barge-In override the DND setting.
Setting DND eliminates audible signals that are sent through the
speaker, including Voice Announcement. However, a call to this station
can still be answered.
Callback Request may be set to a Multiline Terminal in DND mode.
Ring Transfer, Camp-On, and Tone Override cannot be set to a station
that has DND set.
P
.
DB (set at default).
P
.
.
FH
NEC Business Solutions Ltd
Do Not Disturb (DND)