Live Monitoring - NEC Xen IPK Features & Specifications Manual

Live Monitoring

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
Xen Multiline Terminal users can listen to voice mail messages as the
message is being recorded by the XenMail VMS/FMS. The Live Monitoring
feature is password protected and can be used in automatic or manual
mode. When Live Monitoring is in use, the audio is played from the Multiline
Terminal Speaker. The terminal user can pick up the handset and speak to
the caller anytime during the recording.
Terminal Type
All Multiline Terminals with soft keys.
Required Components
VMS (2/4/8)-U( ) ETU
FMS (2/4)-U( ) ETU
To enable Live Monitoring
1. Press the feature access key assigned as Live Monitoring.
2. Live Monitoring key flashes red while this feature is being set.
3. Dial the password (same as Station Outgoing Lockout password;
default is 0000000000).
To operate Manual Live Monitoring while the caller is leaving a voice
mail message
1. Press the Start soft key while the CO caller is leaving a message.
2. Press the Cancel softkey to stop Live Monitoring.
- OR -
Pick up handset to retrieve the call from voice mail.
L-4
L4 – 399