NEC Xen IPK Features & Specifications Manual page 172

July 2003
162 – C8
To set Call Forward - All Calls from Single Line Telephone or
Multiline Terminal:
1. Lift the handset or press
2. Dial Access Code
3. Dial the station number or hunt group master number where incoming
calls are to be forwarded.
4. Receive the confirmation tone, and restore handset or press
To verify (Multiline Terminals only):
T
1. A winking
Calls mode.
- OR -
2. The Feature Access or single On/Off key LED (if equipped) steadily
lights if this setting is assigned on the key.
To cancel (Multiline Terminal only):
1. Press Call Forward - All Calls On/Off key.
P
2. Press .
To cancel (Single Line Telephone or Multiline Terminal):
1. Lift the handset or press
2. Dial Access Code
3. Receive confirmation tone, and restore the handset or press
To set from a destination station (Attendant Positions only):
1. Lift the handset or press
2. Dial Access Code
3. Dial the station number to be forwarded.
4. Receive confirmation tone, and restore the handset or press
P
.
(set as default).
DA
LED indicates the station is in Call Forward - All
P
.
(set as default).
DB
P
.
(set as default).
DG
NEC Business Solutions Ltd
P
P
P
Call Forward - All Calls
.
.
.