Description Of Hardware; Front Panel; Back Panel - Supermicro SSE-G3648B Installation Manual

SSE-G3648B/BR Switch Installation Guide

Description of Hardware

Front Panel

1. Front Panel Diagram
The front panel descriptions of the SSE-G3648B/BR switches are given in the following table:
Table 1-1: Front Panel Descriptions of SSE-G3648B/BR Switches
RJ45
Type
Port
SSE-G3648B/BR
48
The front panel of SSE-G3648B/BR is shown below:
Figure 1-2: Front Panel of SSE-G3648B/BR Switches
2. Console description
SSE-G3648B/BR switches provide an RJ-45 serial console port. Users can perform the local
and telnet configuration through this port.
The console port supports asynchronous mode Set the data bit as 8, the stop bit as 1, the parity
bit as none, and the default baud rate as 115200bps.

Back Panel

The back panel of SSE-G3648B/BR switches includes one 90~264VAC, 47Hz~63Hz power
supply. An optional additional power supply provides redundancy. There are three fans.
Fig 1-3: Back Panel SSE-G3648B/BR (Standard Configuration)
10/100/1000Base-T
SFP+ Port
ETHERNET Port
4
Page 6
Console
Port
1 1
USB 2.0
Interface
1