Display Pim Neighbor - HP 6125XLG Command Reference Manual

Field
PIM J/P hold interval
PIM BSR domain border
PIM BFD
Number of routers on network not using DR
priority
Number of routers on network not using LAN
delay
Number of routers on network not using
neighbor tracking

display pim neighbor

Use display pim neighbor to display PIM neighbor information.
Syntax
display pim neighbor [ neighbor-address | interface interface-type interface-number | verbose ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
neighbor-address: Specifies a PIM neighbor by its IP address. If you do not specify a PIM neighbor, this
command displays information about all PIM neighbors.
interface interface-type interface-number: Specifies an interface by its type and number. If you do not
specify an interface, this command displays information about PIM neighbors on all interfaces.
verbose: Displays detailed PIM neighbor information. If you do not specify this keyword, this command
displays brief PIM neighbor information.
Examples
# Display brief information about all PIM neighbors.
<Sysname> display pim neighbor
Total Number of Neighbors = 2
Neighbor
10.1.1.2
20.1.1.2
# Display detailed information about the PIM neighbor with the IP address 1 1.1 10.0.20.
<Sysname> display pim neighbor 11.110.0.20 verbose
Neighbor: 11.110.0.20
Interface: Vlan-interface3
Uptime: 00:00:10
Interface
Vlan1
Vlan2
Description
Joined/pruned state holdtime timer.
Whether a PIM domain border is configured.
Whether PIM is enabled to work with BFD.
Number of routers that do not use the DR priority field on the
subnet where the interface resides.
Number of routers that do not use the LAN delay field on the
subnet where the interface resides.
Number of routers that are not enabled with neighbor tracking
on the subnet where the interface resides.
Uptime Expires DR-Priority
02:50:49 00:01:31 1
02:49:39 00:01:42 1
64