Changing The Startup Mode - HP 5920 Series Installation Manual

Starting to get the image flash:/5900_5920-cmw710-boot-a2106p01.bin.............
...........................................................Done!
The flash:/5900_5920-cmw710-boot-a2106p01.bin image is
self-decompressing..............................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
.............................................................Done!
System is starting...
User interface aux0 is available.
Press ENTER to get started.
Press Enter at the prompt, and you can configure the switch when the prompt <HP> appears.

Changing the startup mode

The system by default starts up in fast mode. To change the startup mode to full, press Ctrl + B within one
second to enter the Boot menu:
BOOT MENU
1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Modify BootRom password
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set BootRom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Enter 9 to change the startup mode.
The current mode is fast startup mode!
Are you sure you want to change it to full startup mode? Yes or No (Y/N):
Enter Y at the prompt.
Setting...Done!
BOOT MENU
1. Download image to flash
29