Dot1P-Priority (Mld-Snooping View); Dscp (Mld-Snooping View) - HP 3600 v2 Series Command Reference Manual
Ip multicast
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (441 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Advertisement
Table 57 Command output
Field
general queries
specific queries
reports
dones
reports with right and wrong records
specific sg queries
dot1p-priority (MLD-snooping view)
Syntax
dot1p-priority priority-number
undo dot1p-priority
View
MLD-snooping view
Default level
2: System level
Parameters
priority-number: Specifies an 802.1p precedence for MLD messages, in the range of 0 to 7. A higher
number indicates a higher precedence.
Description
Use dot1p-priority to set the 802.1p precedence for MLD messages globally.
Use undo dot1p-priority to restore the default.
The default 802.1p precedence for MLD messages is 0.
Examples
# Set the 802.1p precedence for MLD messages to 3 globally.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] dot1p-priority 3
dscp (MLD-snooping view)
Syntax
dscp dscp-value
undo dscp
View
MLD-snooping view
Description
General query messages
Multicast-address-specific query messages
Report messages
Done messages
Reports that contain correct and incorrect records
Multicast-address-and-source-specific queries
257
Advertisement
Table of Contents
