Encap-Data-Enable; Import-Source - HP 3600 v2 Series Command Reference Manual

Field
Peer's Address
Number of SA
Number of source and group, counted by
AS
AS
Number of source
Number of group

encap-data-enable

Syntax
encap-data-enable
undo encap-data-enable
View
Public network MSDP view, VPN instance MSDP view
Default level
2: System level
Parameters
None
Description
Use encap-data-enable to enable encapsulation of multicast data in SA messages.
Use undo encap-data-enable to restore the default.
By default, an SA message contains only an (S, G) entry. No multicast data is encapsulated in an SA
message.
Examples
# Enable encapsulation of multicast data in SA messages on the public network.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] encap-data-enable
# Enable encapsulation of multicast data in SA messages in VPN instance mvpn.
<Sysname> system-view
[Sysname] msdp vpn-instance mvpn
[Sysname-msdp-mvpn] encap-data-enable

import-source

Syntax
import-source [ acl acl-number ]
Description
Address of the MSDP peer that sent SA messages.
Number of (S, G) entries from this peer.
Number of cached (S, G) entries that the AS counted.
AS number. A question mark indicates that the system could not
obtain the AS number.
Number of multicast sources from this AS.
Number of multicast groups from this AS.
184