Pim Hello-Option Dr-Priority; Pim Hello-Option Holdtime - HP 6125XLG Command Reference Manual

Examples
# Enable IP multicast routing, and enable PIM-DM on VLAN-interface 100.
<Sysname> system-view
[Sysname] multicast routing-enable
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim dm
Related commands
multicast routing-enable

pim hello-option dr-priority

Use pim hello-option dr-priority to set the priority for DR election for an interface.
Use undo pim hello-option dr-priority to restore the default.
Syntax
pim hello-option dr-priority priority
undo pim hello-option dr-priority
Default
The priority for DR election is 1.
Views
Interface view
Predefined user roles
network-admin
Parameters
priority: Sets the priority for DR election, in the range of 0 to 4294967295. A larger value indicates a
higher priority.
Usage guidelines
You can set the priority for DR election in PIM view or interface view. The configurations made in PIM
view are effective on all interfaces, and the configurations made in interface view are effective on only
the current interface. If you set the priority for DR election in both PIM view and interface view, the
configuration in interface view always takes precedence.
Examples
# Set the priority for DR election to 3 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option dr-priority 3
Related commands
hello-option dr-priority (PIM view)

pim hello-option holdtime

Use pim hello-option holdtime to set the PIM neighbor lifetime on an interface.
77