Dell PowerConnect W-7200 Series Reference Manual page 62

Feb 26 02:56:02 :202536:
00:26:c6:52:6b:7c reqIP=10.10.10.254 Options 3d:010026c6526b7c 0c:41525542412d46416c73653232
51:00000041525542412d46416c736532322e73757279612e636f6d 3c:4d53465420352e30
37:010f03062c2e2f1f21f92b 2b:dc0100
Examples
The following command sets the client's user role to "guest" if the client associates to the "Guest" ESSID. The rule
description indicates that is was created for special customers.
aaa derivation-rules user derive1
set role condition essid equals Guest set-value guest description
createdforspecialcustomers
The example rule shown below sets a user role for clients whose host name (DHCP option 12) has a value of
6C6170746F70, which is the hexadecimal equivalent of the ASCII string "laptop". The first two digits in the Value
field are thehexadecimal value of 12 (which is 0C), followed by the specific signature to be matched
aaa derivation-rules user device-role
set role condition dhcp-option equals 0C6C6170746F70 set-value laptop_role
Command History
Version
ArubaOS 3.0
ArubaOS 6.0
ArubaOS 6.1
Command Information
Platforms
All platforms
62 | aaa derivation-rules
<DBUG> |dhcpdwrap| |dhcp| Datapath vlan10: REQUEST
Description
Command introduced.
Description parameter was introduced.
DHCP-Option rule type was introduced.
Licensing
Base operating system. The PEFNG
license must be installed for a user
role to be assigned.
Command Mode
Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide