Dell PowerConnect W-7200 Series Reference Manual page 23

Arubaos 6.2
Hide thumbs Also See for PowerConnect W-7200 Series:
Table of Contents

Advertisement

Parameter
wpa-key-period
<milliseconds>
wpa2-key-delay
<milliseconds>
tls-guest-access
tls-guest-role <role>
unicast-keyrotation
use-session-key
use-static-key
validate-pmkid
voice-aware
wep-key-retries <number>
wep-key-size
wpa-fast-handover
wpa-key-retries
xSec-mtu <mtu>
Usage Guidelines
The 802.1X authentication profile allows you to enable and configure machine authentication and 802.1X
termination on the controller (also called "AAA FastConnect").
In the AAA profile, specify the 802.1X authentication profile, the default role for authenticated users, and the server
group for the authentication.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Interval, in milliseconds, between each WPA key
exchange.
Set the delay between EAP-Success and unicast key
exchange.
Enables guest access for EAP-TLS users with valid
certificates.
User role assigned to EAP-TLS guest.
NOTE: This parameter requires the PEFNG license.
Enables unicast key rotation.
Use RADIUS session key as the unicast WEP key.
Use static key as the unicast/multicast WEP key.
This parameter instructs the controller to check the
pairwise master key (PMK) ID sent by the client.
When this option is enabled, the client must send a
PMKID in the associate or reassociate frame to
indicate that it supports OKC or PMK caching;
otherwise, full 802.1X authentication takes place.
(This feature is optional, since most clients that
support OKC and PMK caching do not send the
PMKID in their association request.)
Enables rekey and reauthentication for VoWLAN
clients.
NOTE: The Next Generation Policy Enforced Firewall
license must be installed.
Number of times WPA/WPA2 key messages are
retried.
Dynamic WEP key size, either 40 or 128 bits.
Enables WPA-fast-handover. This is only applicable
for phones that support WPA and fast handover.
Set the Number of times WPA/WPA2 Key Messages
are retried
Sets the size of the MTU for xSec.
Range
Default
1000-
1000 ms
5000
1-2000
0 ms
(no delay)
disabled
guest
disabled
disabled
disabled
disabled
enabled
1-5
3
40 or
128 bits
128
disabled
disabled
1024-
1300 bytes
1500
aaa authentication dot1x | 23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect w-series

Table of Contents