New Properties - Siemens SIMATIC ET 200SP Manual

New properties

What's new in the BaseUnits manual, edition 02/2018, compared to edition 12/2016?
What's new?
New
contents
BaseUnits (6ES7193-6BP.../3RK1908-0AP00...)
Manual, 02/2018, A5E03727049-AJ
Potential distributor
modules
BaseUnit type U0
Can be used for all I/O
modules whose article
number ends in U0
What are the customer benefits?
A system-integrated potential distribu-
tion can be implemented via the
PotDis modules.
One application is, for example, the
design of digital input modules with 16
channels and three-wire connection.
You use the potential distributor mod-
ules to reserve the unused signal
cables of antivalent sensors.
Another application is the supply of
potentials for supply of external com-
ponents.
Light-colored version:
BU20-P16+A0+2D
Per slot, up to 16 process terminals
can be supplied to the module with
max. 230 V/5 A per terminal.
2 supply terminals on integrated
•
self-assembling voltage buses
P1/P2, max. 230 V AC/10 A
Separation of voltage buses P1/P2
•
and AUX from the adjacent mod-
ule on the left
Dark-colored version: BU20-
P16+A0+2B
Per slot, up to 16 process terminals
can be supplied to the module with
max. 230 V/5 A per terminal.
2 terminals for external sup-
•
ply/forwarding from integrated self-
assembling voltage buses P1/P2
Bridging voltage buses P1/P2 and
•
AUX to the adjacent module on
the left
2
Where can I find infor-
mation?
Section Potential distrib-
utor modules (Page 113)
Section
BU20-P16+A0+2D
(Page 79)
Section
BU20-P16+A0+2B
(Page 83)
13