At^snfd Set Audio Parameters To Manufacturer Default Values - Siemens MC35 Command Set

AT Command Set
OK
at^snfa?
^SNFA: 1
OK
at^snfi?
^SNFI: 5,1
OK
at^snfi=5,45
OK
at^snfa?
^SNFA: 45
OK

8.20 AT^SNFD Set audio parameters to manufacturer default values

Execute command
TA resets the parameters currently selected in audio modes 2 – 6 to their factory
values.
AT^SNFD
The restored values are: <inBbcGain>, <inCalibrate>, <outBbcGain>, <outCali-
brate[0 to 4]>, <sideTone>.
<outStep> is not be reset to its default. Instead, the current value will be retained
when the ME is powered down with AT^SMSO or restarted with AT+CFUN=1,1.
Response
OK
Reference Note
Siemens
MC35_ATC_01_V05.00 Page 206 of 256 15.07.2002