Debug Platform Port-Security - Cisco Catalyst 2960 Command Reference Manual

debug platform port-security

debug platform port-security
Use the debug platform port-security privileged EXEC command to enable debugging of
platform-dependent port-security information. Use the no form of this command to disable debugging.
Syntax Description
add
aging
all
delete
errors
rpc
warnings
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines The undebug platform port-security command is the same as the no debug platform port-security
command.
Related Commands Command
show debugging
Catalyst 2960 Switch Command Reference
B-42
debug platform port-security {add | aging | all | delete | errors | rpc | warnings}
no debug platform port-security {add | aging | all | delete | errors | rpc | warnings}
Display secure address addition debug messages.
Display secure address aging debug messages.
Display all port-security debug messages.
Display secure address deletion debug messages.
Display port-security error debug messages.
Display remote procedure call (RPC) debug messages.
Display warning debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Appendix B Catalyst 2960 Switch Debug Commands
OL-8604-04