Creating A Destination Profile - Cisco Nexus 5600 Series Configuration Manual

Configuring Smart Call Home
Step 9
Step 10
Step 11
Step 12
The following example shows how to configure the contact information for Call Home:
switch# configuration terminal
switch(config)# snmp-server contact personname@companyname.com
switch(config)# callhome
switch(config-callhome)# email-contact personname@companyname.com
switch(config-callhome)# phone-contact +1-800-123-4567
switch(config-callhome)# street-address 123 Anystreet St., Anycity, Anywhere
What to Do Next
Create a destination profile.

Creating a Destination Profile

You must create a user-defined destination profile and configure the message format for that new destination
profile.
Procedure
Step 1
OL-31641-01
Command or Action
switch(config-callhome)# site-id
site-number
switch(config-callhome)#
switch-priority number
switch# show callhome
switch(config)# copy
running-config startup-config
Command or Action
switch# configure terminal
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
Purpose
The customer-number can be up to 255 alphanumeric
characters.
(Optional)
Configures the site number for this switch.
The site-number can be up to 255 alphanumeric characters in
free format.
(Optional)
Configures the switch priority for this switch.
The range is from 0 to 7, with 0 being the highest priority and
7 the lowest. The default is 7.
Note Switch priority is used by the operations personnel
or TAC support personnel to decide which Call
Home message should be responded to first. You
can prioritize Call Home alerts of the same severity
from each switch.
(Optional)
Displays a summary of the Smart Call Home configuration.
(Optional)
Saves the change persistently through reboots and restarts by
copying the running configuration to the startup configuration.
Purpose
Enters global configuration mode.
Creating a Destination Profile
127