Creating A Destination Profile - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Configuring Smart Call Home
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
This example shows how to configure the contact information for Call Home:
switch# configuration terminal
switch(config)# snmp-server contact personname@companyname.com
switch(config)# callhome
switch(config-callhome)# email-contact personname@companyname.com
switch(config-callhome)# phone-contact +1-800-123-4567
switch(config-callhome)# street-address 123 Anystreet St., Anycity, Anywhere

Creating a Destination Profile

You must create a user-defined destination profile and configure the message format for that new destination
profile.
OL-16597-01
Command or Action
switch(config-callhome)#
phone-contact
international-phone-number
switch(config-callhome)#
streetaddress address
switch(config-callhome)#
contract-id contract-number
switch(config-callhome)#
customer-id customer-number
switch(config-callhome)# site-id
site-number
switch(config-callhome)#
switch-priority number
switch# show callhome
switch# copy running-config
startup-config
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Creating a Destination Profile
Purpose
Configures the phone number in international phone
number format for the primary person responsible for the
device. Up to 17 alphanumeric characters are accepted in
international format.
The phone number cannot contain spaces. Be sure
Note
to use the + prefix before the number.
Configures the street address as an alphanumeric string
with white paces for the primary person responsible for
the switch. Up to 255 alphanumeric characters are accepted,
including spaces.
(Optional)
Configures the contract number for this switch from the
service agreement. The contract number can be up to 255
alphanumeric characters in free format.
(Optional)
Configures the customer number for this switch from the
service agreement. The customer number can be up to 255
alphanumeric characters in free format.
(Optional)
Configures the site number for this switch. The site number
can be up to 255 alphanumeric characters in free format.
(Optional)
Configures the switch priority for this switch. The range
is from 0 to 7, with 0 being the highest priority and 7 the
lowest. The default is 7.
(Optional)
Displays a summary of the Call Home configuration.
(Optional)
Saves this configuration change.
355