Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 263

Chapter 10 Obtaining and Installing Licenses
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 10-1
Feature License
SAN extension over IP package for IPS-8
modules
(SAN_EXTN_OVER_IP)
SAN extension over IP package for IPS-4
modules
(SAN_EXTN_OVER_IP_IPS4)
SAN extension over IP package for
MPS-14/2 modules
(SAN_EXTN_OVER_IP_IPS2)
Note
SAN extension over IP package for one
MPS-18/4 or one MPS-18/4 FIPS in the
Cisco MDS 9500 series
(SAN_EXTN_OVER_IP_18_4)
OL-17256-03, Cisco MDS NX-OS Release 4.x
Feature-Based Licenses (continued)
The FCIP, IVR, and SAN extension
tuner features are bundled with the
Cisco MDS 9216i switch and do not
require the SAN extension over IP
package to be installed for the fixed
IP ports on the integrated supervisor
module. You must install a SAN
extension over IP package if you
install an MPS-14/2, IPS-8, or IPS-4
module in the Cisco MDS9216i
switch.
Features
The following features apply to IPS-8 and IPS-4
modules:
FCIP
•
FCIP compression
•
FCIP write acceleration
•
FCIP tape read acceleration
•
SAN extension tuner features
•
IVR over FCIP
•
IVR NAT over FCIP
•
Network Stimulator
•
The following features apply to the MPS-14/2 module
and the fixed Cisco MDS 9216i IP ports:
FCIP
•
• Hardware-based FCIP compression
• FCIP write acceleration
• FCIP tape read acceleration
SAN extension tuner features
•
IVR over FCIP
•
IVR NAT over FCIP
•
The following features apply to the MPS-18/4 or
MPS-18/4 FIPS modules:
FCIP
•
Hardware-based FCIP compression
•
FCIP write acceleration
•
FCIP tape read acceleration
•
SAN extension tuner features
•
IVR over FCIP
•
IVR NAT over FCIP
•
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Licensing Model
10-5