Viewing And Disconnecting Clients - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Admin
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
From the Fabric drop-down list, choose the fabric for notification.
Step 5
Either check the VSAN Scope check box to receive notifications for all VSANs, or enter the VSAN IDs
Step 6
in the ID List field to limit the VSANs for which you want to receive notifications.
Enter the e-mail address for notifications in the Address field.
Step 7
From the Minimum Severity drop-down list, select the severity level of the messages to receive.
Step 8
Click Add to add the notification.
Step 9
The traps sent by Fabric Manager Server correspond to the severity type followed by a text description:
Note
trap type(s) = 40990 (emergency) 40991 (alert) 40992 (critical) 40993 (error) 40994
(warning) 40995 (notice) 40996 (info) 40997 (debug)textDescriptionOid = 1, 3, 6, 1, 4, 1,
9, 9, 40999, 1, 1, 3, 0
To remove a notification forward using Fabric Manager Web Client, follow these steps:
Click the Admin tab, and then click Configure.
Step 1
Click Forwarding in the left navigation pane.
Step 2
Check the check box in front of the notification that you want to remove.
Step 3
Click Remove.
Step 4

Viewing and Disconnecting Clients

To view or disconnect clients from the Fabric Manager Server using Fabric Manager Web Client, follow
these steps:
Click the Admin tab, and then click Configure.
Step 1
Click Clients in the left navigation pane.
Step 2
You see the Clients page shown in
Cisco MDS 9000 Family Fabric Manager Configuration Guide
7-50
Figure 7-44.
Chapter 7 Fabric Manager Web Client
OL-17256-03, Cisco MDS NX-OS Release 4.x