Fabric Pane - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 5 Fabric Manager Client
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Fabric Pane

Use the Fabric pane to display the graphical representation of your fabric. Table 5-1 explains the
graphics you may see displayed, depending on which devices you have in your fabric.
The bottom of the Fabric pane has the following tabs:
•
•
•
Fabric map display is based on what you select in the logical domain pane. When you select a fabric
Note
node, all the switches that belong to that fabric will be enabled. When you select the group node, all the
switches that belong to the groups listed under that group node will be enabled. When you select only a
group, all the switches that belong to the specific group will be enabled.
OL-17256-03, Cisco MDS NX-OS Release 4.x
Fabric—When displaying multiple fabrics, each fabric has its own tab. You can switch between
fabrics by clicking on their respective tabs.
Log—Displays messages that describe Fabric Manager operations, such as fabric discovery.
Events—Displays information about the SNMP traps received by the management station. This
includes combination events as detected by discovery and important traps such as license, SNMP,
and FICON.
Fabric Manager Client Quick Tour: Server Admin Perspective
Cisco MDS 9000 Family Fabric Manager Configuration Guide
5-11