Viewing Performance Information For End Devices - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Performance
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Viewing Performance Information for End Devices

To view host and storage port traffic and errors using Fabric Manager Web Client, follow these steps:
Click the Performance tab, and then click End Devices tab.
Step 1
You see the End Devices tab window as shown in
Figure 7-9
Expand a fabric and select one of the VSANs to display performance information for the end devices in
Step 2
that VSAN.
Click the name of a device in the Name column to see a graph of the traffic on that device for the past
Step 3
24 hours.
There are variations to this procedure. In addition to these basic steps, you can also perform the
Note
following steps to view detailed information for the end devices:
•
•
•
•
•
Cisco MDS 9000 Family Fabric Manager Configuration Guide
7-16
End Devices Tab
To change the time range for this graph, select it from the drop-down list in the upper right corner.
To view the detailed information for specific period, drag the slider control to choose the time
interval for which you need the information.
To view information in grid format, click the grid icon in the bottom right corner.
To export the data into a spreadsheet, click the excel icon in the upper right corner and then click
Save.
To view real time information, select Real Time from the drop-down list in the upper right corner.
Real time data is updated in every 10 seconds.
Chapter 7
Figure 7-9.
OL-17256-03, Cisco MDS NX-OS Release 4.x
Fabric Manager Web Client