Installing Device Manager - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Installing the Management Software
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 2-14
Note
Click Finish to close the Cisco Fabric Manager Installer window.
Step 18
If you installed Fabric Manager Server, icons for Fabric Manager and Device Manager are not created
on the desktop until you launch Fabric Manager Client. Follow the instructions in the
Manager Client in Cisco SAN-OS Release 3.2(1) and Later" section on page 5-2
Manager Client.
If you checked the Create shortcuts check box, a Cisco MDS 9000 program group is created under Start
> Programs on Windows. This program group contains shortcuts to batch files in the install directory.
On a UNIX (Solaris or Linux) machine, shell scripts are created in the install directory. The shell scripts
that run the programs equivalent to the Windows services are FMServer.sh, all the server-side data and
Performance Manager data are stored in the install directory.
Fabric Manager Client cannot run without Fabric Manager Server. The server component is downloaded
and installed when you download and install Fabric Manager. On a Windows machine you install the
Fabric Manager Server as a service. This service can then be administered using Services in the
Microsoft Windows Control Panel. The default setting for the Fabric Manager Server service is that the
server is automatically started when the machine is rebooted. You can change this behavior by modifying
the properties in Services.

Installing Device Manager

To install Device Manager on your workstation, follow these steps:
Cisco MDS 9000 Family Fabric Manager Configuration Guide
2-34
Install Complete
If you installed Fabric Manager Standalone, you can choose to launch Fabric Manager or Device
Manager by checking the Launch Fabric Manager or Launch Device Manager check boxes.
Icons for Fabric Manager and Device Manager are automatically created on the desktop.
Chapter 2 Installing Cisco MDS NX-OS and Fabric Manager
OL-17256-03, Cisco MDS NX-OS Release 4.x
"Launching Fabric
to launch Fabric