Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 169

Chapter 5 Fabric Manager Client
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Note
Use Secure Shell instead of Telnet—Specifies whether to use SSH or Telnet when using the CLI to
•
communicate with the switch. If enabled, you must specify the path to your SSH application. The
default setting is disabled.
Confirm Deletion—Displays a confirmation pop-up window when you delete part of your
•
configuration using Fabric Manager. The default setting is enabled (checked).
Export Tables with Format—Specifies the type of file that is created when you export a table using
•
Device Manager. The options are tab-delimited or XML. The default setting is Tab-Delimited.
Show CFS Warnings—Shows warning messages if CFS is not enabled on all switches for a selected
•
feature.
The default SNMP preferences for Fabric Manager are as follows:
Retry request 1 time(s) after 5 sec timeout—You can set the retry value to 0-5, and the timeout value
•
to 3-30.
Trace SNMP packets in Log—The default setting for this value is ON.
•
Enable Audible Alert when Event Received—The default setting for this value is OFF.
•
The default Map preferences for Fabric Manager are as follows:
Display Unselected VSAN Members—Displays the unselected VSAN members in the Fabric pane.
•
The default setting for this value is ON.
Display End Devices—Displays the fabric's end devices in the Fabric pane. The default setting for
•
this value is ON.
Display End Device Labels—Displays the fabric's end device labels in the Fabric pane. The default
•
setting for this value is OFF.
• Expand Loops—Displays the loops in the fabric as individual connections in the Fabric pane. The
default setting for this value is OFF.
• Expand Multiple Links—Displays multiple links in the Fabric pane as separate lines instead of one
thick line. The default setting for this value is OFF.
Open New Device Manager Each Time—Opens a new instance of Device Manager each time that
•
you invoke it from a switch in your fabric. The default value is OFF, which means that only one
instance of Device Manager is open at a time.
Select Switch or Link from Table—Allows you to select a switch or link in the Fabric pane by
•
clicking the switch or link in a table in the Information pane. The default setting for this value is
disabled (unchecked), which means clicking a switch or link in the table does not change the switch
or link selection in the Fabric pane.
• Layout New Devices Automatically—Automatically places new devices in the Fabric pane in an
optimal configuration. The default setting for this value is OFF. In this mode, when you add a new
device, you must manually reposition it if the initial position does not suit your needs.
Use Quick Layout when Switch has 30 or more End Devices—Displays the default setting for this
•
value (30). You can enter any number in this field. Enter 0 to disable Quick Layout.
Override Preferences for Non-default Layout—Displays the default setting for this value (ON).
•
OL-17256-03, Cisco MDS NX-OS Release 4.x
If you browse for a path or enter a path and you have a space in the pathname (for example,
c:\program files\telnet.exe), then the path will not work. To get the path to work, you must
manually place quotes around it (for example, "c:\program files\telnet.exe").
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Setting Fabric Manager Preferences
5-31