Viewing Performance Information For Gige Ports; Viewing Other Statistics - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 7 Fabric Manager Web Client
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Viewing Performance Information for GigE Ports

To view GigE ports using Fabric Manager Web Client, follow these steps:
Click the Performance tab, and then click Ethernet.
Step 1
You see the Ethernet tab window as shown in
Figure 7-16
Step 2 Expand a fabric and select one of the VSANs to display the GigE ports in that VSAN.
There are variations to this procedure. In addition to these basic steps, you can also:
Note
•
•

Viewing Other Statistics

To view other statistics using Fabric Manager Web Client, follow these steps:
Click the Performance tab, and then click Others.
Step 1
You see the Others tab window as shown in
OL-17256-03, Cisco MDS NX-OS Release 4.x
Ethernet Tab
Select the time range, and click Filter to filter the display.
Select the name of a GigE port from the Name column to see a graph of the traffic across that GigE
port for the past 24 hours. You can change the time range for this graph by selecting it from the
drop-down list in the upper right corner.
Figure 7-16.
Figure 7-17.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Performance
7-23